Simple care tips to keep flame-retardant, TPU-coated outdoor cushions clean, protected and looking good season after season.
Outdoor cushions work hard. They get sun, rain, sunscreen, barbecue smoke and the occasional glass of red wine. If yours have a flame-retardant (FR) finish and a TPU coating, they’re built for it. A bit of the right care will help them last much longer.
What FR and TPU actually do
TPU coating is a thin, flexible waterproof layer on the back of the fabric. It stops rain and spills soaking straight through to the filling.
FR (flame retardant) treatment makes the fabric slower to ignite and slower to burn. It is not fireproof, so keep cushions well away from open flames, hot coals and cigarettes.
Both can be damaged by the wrong cleaning method. Harsh chemicals and too much heat are the main culprits. Washing can’t restore either property once it’s gone, so gentle care matters.
Everyday care
Brush or shake off dirt and leaves regularly. Grit rubbed into the fabric wears it down.
Wipe up spills straight away. Blot, don’t rub, using a clean damp cloth.
Turn cushions now and then so sun exposure and wear are even.
Let them dry fully after rain before you stack them or put them away.
Deep cleaning, step by step
Brush off loose dirt with a soft brush.
Mix a mild solution: a few drops of gentle washing-up liquid or mild soap in lukewarm water.
Sponge the surface gently with a soft cloth or sponge. Work in small areas.
Rinse with clean water and wipe away the soap. Leftover residue attracts dirt.
Air dry in a shaded, well-ventilated spot. Stand cushions on their edge so air gets around them.
If your cushions have removable covers, check the care label first. Many TPU-backed covers should not go in a washing machine, and hot washes can damage both the coating and the FR finish. If the label says hand wash only, believe it.
Stains and mildew
Food and drink: blot, then use the mild soap solution above.
Mildew or green marks: use the soap solution and a soft brush, then dry thoroughly in the shade. Mildew grows in damp, so dry cushions are your best defence.
Sun cream, insect repellent and oils: clean them off promptly. Some repellents can damage coatings.
What to avoid
Bleach, solvents, white spirit or strong stain removers. They can break down the TPU and strip the FR treatment.
Pressure washers. They can force water through seams and lift the coating.
Tumble dryers, hair dryers, radiators and direct heat. Heat can soften or crack TPU.
Ironing or steaming.
Dry cleaning, unless the label specifically allows it.
Fabric softener. It can leave a film and may interfere with the FR finish.
Barbecues, fire pits and patio heaters. Keep cushions well back, and never rest hot items on them.
Storing cushions over winter
Make sure they’re completely clean and dry before you pack them away.
Store them somewhere dry and ventilated, like a garage, shed or storage box.
Don’t wrap them in tight plastic, which traps moisture and invites mildew. A breathable cover is better.
Avoid squashing them under heavy items, and don’t fold them sharply in freezing temperatures. TPU can crack along hard creases when it’s very cold.
A note on water
TPU coating makes the fabric water-resistant, but water can still get in through zips and seams, and inside foam it takes a long time to dry. In heavy or prolonged rain, bring cushions under cover. If they do get soaked, stand them on their edge and let them dry fully before use.
Quick checklist
Brush off dirt often
Clean with mild soap and lukewarm water only
Air dry in the shade
No bleach, high heat or pressure washers
Keep away from flames
Store dry and ventilated
Look after the coating and the FR finish, and your cushions will stay comfortable, protected and good-looking for many seasons.

